Perm & Remote Nuclear Manufacturing Engineer ( I&C)
TITLE: Perm/FTE & Remote Nuclear Manufacturing Engineer 3 (I&C)
You can antipate 25% travel to Houston, TX andor Portland, OR - all expenses reimbursed.
Industry: Nuclear Power
Job Description
This position is open to full-time remote work within the contiguous United States.
Pay and Benefits:
The target pay range for this position is: $111,105 - $134,093 annually.
The full pay range is $99,611 - $155,803 ( Bonus, Benefits, etc. added into plan)
At Seine Client, compensation decisions are determined using factors such as relevant job-related skills, full-time working experience, education and training, equity within the department.
POSITION SUMMARY:
Responsible for technical supplier oversight regarding manufacturing and manufacturing development projects for nuclear instrumentation & control (I&C) systems and electrical components.
The manufacturing engineer will provide consultation to Seine Client design organizations regarding manufacturing, specify and collect product manufacturing requirements including all standards and specifications, and generally act as a primary point of contact between Seine Client design organizations and manufacturing suppliers for technical information and communications.
The manufacturing engineer will apply industry expertise, codes and standards, and regulatory guidance in the general area of I&C manufacturing and supply chain development.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Interact daily with Seine Client design organizations to interpret their needs and requirements to manufacturing entities.
• Contributes to the Seine Client design organizations by applying knowledge of product design, fabrication, assembly, tooling, and materials.
• Perform subcontract technical lead duties by preparing requirements documents and schedules, coordinating and monitoring the technical aspects of assigned manufacturing and manufacturing development projects.
• Review manufacturing documentation of supplier to ensure compliance with specifications, codes, standards, and QA/QC requirements.
• Develop, check, or review internal drawings, studies, and specifications
• Review engineering deliverables and initiate appropriate corrective actions
• Monitoring supplier performance to ensure compliance with procedures, applicable codes, practices, QA/QC policies, performance standards and specifications.
• Manage supplier manufacturing mockup planning and test results to ensure desired outcomes are achieved.
• Performing surveys of new manufacturing suppliers to assess capabilities and documenting survey results.
• Perform/coordinate grading of technical proposals and working with Procurement team for supplier selection.
• Assist Product Cost Management team with cost estimates and value engineering studies.
• Prepares product and process reports by collecting, analyzing, and summarizing manufacturing information and trends including statistical analysis of manufacturing trends.
• Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.
• Performs other duties as assigned.
• Quality Assurance: Commits to the understanding and implementation of quality assurance regulations, standards and guidelines of 10 CFR 50 Appendix B, 10 CFR 21, and ASME NQA-1.
MINIMUM SKILLS, QUALIFICATIONS AND ABILITIES:
Education:
A minimum of a B.S. degree in Electrical/Computer/Mechanical/Industrial Engineering, or related discipline from a four-year accredited college or university is required.
An advanced degree is preferred.
Experience:
A minimum of 5 years of full-time engineering experience in development and oversight of manufacturing of I&C systems and electrical components is required.
Manufacturing development for complex designs, components, or systems in a regulated environment is required.
Demonstrated project management skills along with strong technical writing skills and use of software including Product Lifecycle Management (PLM) and normal MS Office software is required.
IEEE code experience required. Familiarity with IPC-A-610/620 is preferred.
Industry Requirements:
Eligible to work under Department of Energy 10 CFR Part 810.
Travel Requirements:
Able to travel to local, national, and international suppliers using common forms of transportation.
Anticipate 10%-25% travel. Position will require presence in supplier manufacturing shop environments and will require familiarity with shop safety requirements and working conditions.
Ability to travel nationally and locally using common forms of transportation.
Apply tot his job
Apply To this Job
You can antipate 25% travel to Houston, TX andor Portland, OR - all expenses reimbursed.
Industry: Nuclear Power
Job Description
This position is open to full-time remote work within the contiguous United States.
Pay and Benefits:
The target pay range for this position is: $111,105 - $134,093 annually.
The full pay range is $99,611 - $155,803 ( Bonus, Benefits, etc. added into plan)
At Seine Client, compensation decisions are determined using factors such as relevant job-related skills, full-time working experience, education and training, equity within the department.
POSITION SUMMARY:
Responsible for technical supplier oversight regarding manufacturing and manufacturing development projects for nuclear instrumentation & control (I&C) systems and electrical components.
The manufacturing engineer will provide consultation to Seine Client design organizations regarding manufacturing, specify and collect product manufacturing requirements including all standards and specifications, and generally act as a primary point of contact between Seine Client design organizations and manufacturing suppliers for technical information and communications.
The manufacturing engineer will apply industry expertise, codes and standards, and regulatory guidance in the general area of I&C manufacturing and supply chain development.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Interact daily with Seine Client design organizations to interpret their needs and requirements to manufacturing entities.
• Contributes to the Seine Client design organizations by applying knowledge of product design, fabrication, assembly, tooling, and materials.
• Perform subcontract technical lead duties by preparing requirements documents and schedules, coordinating and monitoring the technical aspects of assigned manufacturing and manufacturing development projects.
• Review manufacturing documentation of supplier to ensure compliance with specifications, codes, standards, and QA/QC requirements.
• Develop, check, or review internal drawings, studies, and specifications
• Review engineering deliverables and initiate appropriate corrective actions
• Monitoring supplier performance to ensure compliance with procedures, applicable codes, practices, QA/QC policies, performance standards and specifications.
• Manage supplier manufacturing mockup planning and test results to ensure desired outcomes are achieved.
• Performing surveys of new manufacturing suppliers to assess capabilities and documenting survey results.
• Perform/coordinate grading of technical proposals and working with Procurement team for supplier selection.
• Assist Product Cost Management team with cost estimates and value engineering studies.
• Prepares product and process reports by collecting, analyzing, and summarizing manufacturing information and trends including statistical analysis of manufacturing trends.
• Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.
• Performs other duties as assigned.
• Quality Assurance: Commits to the understanding and implementation of quality assurance regulations, standards and guidelines of 10 CFR 50 Appendix B, 10 CFR 21, and ASME NQA-1.
MINIMUM SKILLS, QUALIFICATIONS AND ABILITIES:
Education:
A minimum of a B.S. degree in Electrical/Computer/Mechanical/Industrial Engineering, or related discipline from a four-year accredited college or university is required.
An advanced degree is preferred.
Experience:
A minimum of 5 years of full-time engineering experience in development and oversight of manufacturing of I&C systems and electrical components is required.
Manufacturing development for complex designs, components, or systems in a regulated environment is required.
Demonstrated project management skills along with strong technical writing skills and use of software including Product Lifecycle Management (PLM) and normal MS Office software is required.
IEEE code experience required. Familiarity with IPC-A-610/620 is preferred.
Industry Requirements:
Eligible to work under Department of Energy 10 CFR Part 810.
Travel Requirements:
Able to travel to local, national, and international suppliers using common forms of transportation.
Anticipate 10%-25% travel. Position will require presence in supplier manufacturing shop environments and will require familiarity with shop safety requirements and working conditions.
Ability to travel nationally and locally using common forms of transportation.
Apply tot his job
Apply To this Job